Micro Coaxial Cable-Micro Coaxial Cable factory-(FRS)-FRS
Coaxial cables are widely used for transmitting high-frequency signals in telecommunications, broadcasting, and networking. Their performance, particularly transmission speed (data rate), depends on factors like cable design, shielding, impedance, and frequency range
Cable Diameter: Thicker cables (e.g., RG11) handle higher frequencies with less loss.
Shielding: Multi-layer shielding reduces interference, preserving signal integrity.
Dielectric Material: Low-loss materials like foam polyethylene improve high-frequency performance.
2. Coaxial Cable Types by Transmission Speed
A. Standard-Speed Cables (Up to 100 Mbps)
These cables are designed for low-frequency applications with moderate data requirements:
RG-59
Frequency Range: 0–1 GHz
Speed: Up to 100 Mbps
Use Case: Analog CCTV, short-distance video signals.
Limitation: High attenuation above 50 MHz limits long-distance use.
RG-58
Frequency Range: 0–1 GHz
Speed: Up to 50 Mbps
Use Case: Radio antennas, amateur radio, legacy Ethernet (10BASE2).
Limitation: Thin conductor increases resistance and signal loss.
B. Medium-Speed Cables (100 Mbps – 1 Gbps)
These cables balance cost and performance for residential and commercial use:
RG-6
Frequency Range: 0–3 GHz
Speed: Up to 1 Gbps (e.g., DOCSIS 3.0 for cable internet).
Use Case: Cable TV, satellite TV, broadband internet.
Advantage: Quad shielding minimizes interference.
RG-11
Frequency Range: 0–3 GHz
Speed: Up to 1 Gbps
Use Case: Long-distance cable TV/internet runs (e.g., 500+ feet).
Advantage: Lower attenuation than RG-6 due to thicker conductor.
C. High-Speed Cables (1–10 Gbps)
These cables support high-frequency signals for advanced data and RF applications:
RG-213
Frequency Range: 0–5 GHz
Speed: Up to 2.5 Gbps
Use Case: Military communications, high-power RF transmission.
Advantage: Robust shielding and durable construction.
LMR-400 (Low Loss)
Frequency Range: 0–6 GHz
Speed: Up to 5 Gbps
Use Case: Cellular networks, GPS, Wi-Fi extenders.
Advantage: Flexible design with foam dielectric for minimal loss.
HDF-400
Frequency Range: 0–8 GHz
Speed: Up to 10 Gbps
Use Case: Data centers, 5G infrastructure, radar systems.
Advantage: Ultra-low attenuation (<3 dB per 100 ft at 3 GHz).
D. Ultra-High-Speed Cables (10+ Gbps)
Specialized cables for cutting-edge applications requiring extreme bandwidth:
Semi-Rigid Coaxial Cables
Frequency Range: Up to 40 GHz
Speed: 10–40 Gbps (depending on length and connectors).
Use Case: Aerospace, microwave systems, quantum computing.
Advantage: Solid copper outer conductor ensures minimal signal leakage.
Phase-Stable Coaxial Cables
Frequency Range: Up to 50 GHz
Speed: 25–50 Gbps
Use Case: High-frequency test equipment, satellite communications.
Advantage: Stable phase performance under temperature fluctuations.
3. Key Factors Affecting Real-World Speed
While cable specs provide theoretical limits, actual performance depends on:
Cable Length: Longer cables increase attenuation, reducing speed.
Connectors: Poor-quality connectors (e.g., non-gold-plated) introduce resistance.
Interference: EMI/RFI from power lines or motors degrades signals.
Installation: Tight bends or kinks disrupt impedance consistency.
4. Choosing the Right Cable for Your Needs
Residential Use (Internet/TV): RG-6 or RG-11 for speeds up to 1 Gbps.
Enterprise Networks: LMR-400 or HDF-400 for 5–10 Gbps backhaul.
Industrial/RF Systems: Semi-rigid cables for GHz-range precision.
Our factory offers high-quality products at competitive prices
IntroductionIn today’s fast-paced digital world, reliable and high-speed data transmission is critical for industries ranging from telecommunications to aerospace. Enter High-Speed Data Micro-Coax—a cutting-edge miniature coaxial cable e.
H1: Precision Instrument Micro-Coax – Engineered for Critical Signal Integrity Meta Description: Discover Precision Instrument Micro-Coax: Miniature coaxial cable solution optimized for high-frequency signal transmissio.
Feel free to reach out to us for any inquiries or orders.
